When a small cetacean surfaces off the British Columbia coast, look first for the head profile and dorsal fin. A Pacific white-sided dolphin has a short beak and a strongly curved dorsal fin. A harbour porpoise has a rounded head with little visible beak and a low triangular fin. A Dall’s porpoise also has a triangular fin, but a clear side view can reveal a stockier dark body and a large white patch low on the flank. At a distance, any one of those animals might appear as a dark back followed by a fin. Try to see how at least two features fit together. Fisheries and Oceans Canada cetacean identification poster NOAA Fisheries Pacific white-sided dolphin profile NOAA Fisheries Dall’s porpoise profile
Dolphins and porpoises are two families within the toothed cetaceans. Their names in everyday conversation can be imprecise, and a beak or curved fin works better as a clue for particular local species than as a rule that covers every dolphin worldwide. Orcas, for example, belong to the dolphin family. The comparison here focuses on three species you can look for in coastal BC. NOAA Fisheries on differences between dolphins and porpoises
If you saw the head
A Pacific white-sided dolphin has a short projection ahead of the rounded forehead. At the surface it can appear as a small beak during a roll, or become easier to see if an animal clears the water. A side view gives the beak a visible outline. A head-on view may shorten it visually, especially if all you see is a forehead and a splash. If the animal surfaced with its head hidden by a crest, keep the head shape open and look for the next piece of evidence.
A porpoise tends to have a blunter outline where the head meets the water. The short head on a Dall’s porpoise can look small beside the robust body. On a harbour porpoise the forehead and snout produce a rounder silhouette with no obvious projecting beak. From the deck it is common to see the back long after any detail of the head has gone. When that happens, describe what part of the body you saw. “I didn’t see a beak” can mean a good view showed a rounded head or that the head never came into view. Those are different levels of evidence.
Tooth shape separates the families in a specimen. Porpoises have flattened, spade-shaped teeth, while dolphins generally have conical teeth. A free-swimming animal viewed from shore or from a boat will rarely give you a usable look at its teeth. A body profile is the practical starting point.
If you saw only the dorsal fin
Look at the top of the fin and the two edges. The Pacific white-sided dolphin’s fin curves strongly back and may show a lighter rear area. The Dall’s porpoise fin has a triangular appearance, often with light markings near the tip or trailing edge. The harbour porpoise’s fin is low and triangular, usually appearing dark in the field. A view of the whole side of the animal makes those shapes easier to compare than a silhouette of the last few centimetres above a wave. NOAA Fisheries Dall’s porpoise profile DFO Pacific cetacean identification poster
Try to establish the direction of travel. A curving fin seen from a slant can look nearly triangular when the animal is headed away. When it turns sideways, you may see the sweep of the trailing edge. Reflected light can wash out a two-tone fin or add a false pale stripe. If several fins are visible, find one animal with a clear side view and trace that individual until it submerges. A good look at one fin is easier to interpret than a composite of three fins seen from different angles.
If you saw a small triangle and a little rounded back, a harbour porpoise is possible. A triangle on a stockier body that shows a distinct white flank points more strongly toward Dall’s. If the fin looked tall and recurved and the body also had an elongated pale marking along the side, consider the Pacific white-sided dolphin. Keep the first identification provisional until a clearer view supports it.
If you caught a flash of white
Ask which part of the animal was white. The broad white flank of a Dall’s porpoise contrasts with the dark top of its body. The Pacific white-sided dolphin has a more complex pattern with pale areas on its sides and a white underside, and its fin may show contrasting shades. Harbour porpoises also have lighter areas below, but the low surface roll often shows just a greyish or dark back. An animal’s pose can expose or hide a pale patch entirely.
Wait for the marking to appear in a consistent place on the body. If white flickers off the edge of the fin or spreads out after the body submerges, you may be seeing foam. A pale flank remains tied to the body as it rises and rolls. Sunlight can produce a moving reflection, particularly when an animal changes angle. Remember whether the marking was clearly bounded or seemed to dissolve into the water. If you can’t place the white on the animal, it is still worth describing as a flash. A second sighting may give you the context you lacked.
An animal moving very close to an observer can be deceptively difficult to identify. Looking down reveals the back while the water partly masks the lower body. Farther away, a long side view can show exactly where the pale area runs and how much of the back was exposed. That side view often supplies a more complete set of marks than a quick look from straight above.
Use movement to support the shape
Pacific white-sided dolphins sometimes leap and may appear in active groups. Harbour porpoises can pass quietly with a low rolling surfacing. A fast Dall’s porpoise may produce an upright plume of spray. Each behaviour points you toward something to look for on the next pass. Any individual can be swimming in a way that hides a characteristic movement. A Pacific white-sided dolphin can surface quietly. Dall’s porpoises sometimes swim without a noticeable plume. Sea state and viewing angle influence how much of the activity you see. NOAA Fisheries Dall’s porpoise behaviour Canadian harbour porpoise assessment
The number of animals can help describe a sighting. It carries less weight for species identification. You might see one Pacific white-sided dolphin before the rest of the group surfaces. You might count several surfacings by one harbour porpoise as several animals. Dall’s porpoises and Pacific white-sided dolphins can also occur together. If a close animal shows a curved fin and one farther off shows a triangle, keep those views separate while you look for other evidence.
Three short encounters to compare
In the first encounter, you spot several curved fins as animals cross a gap between islands. One animal rises far enough to show a short beak and a pale streak along its side. Those features on the same animal give you a reasonable Pacific white-sided dolphin identification. The movement brought the group to your attention. The visible head and flank did more to settle the identification.
In the second, a patch of spray appears twice in quick succession. You catch a triangular fin and then a broad white area on the low side of a dark, compact body. Those features give you reason to consider Dall’s porpoise. If the broad white area came from a separate flash farther away, record the fin and spray you can connect with certainty. Try to find a second side view before assigning the flank mark to that individual.
In the third, a small back barely clears the surface in smooth water, exposing a low triangular fin. It happens again in nearly the same place. Harbour porpoise fits those observations, especially if the dark shape has a rounded profile and a clear side view shows a subdued pattern. If you only saw a fin, “possible harbour porpoise” preserves the ambiguity. Another observer may have had a better angle and can tell you which details they saw.
When the view won’t resolve the identification
Write down the time and general location, the light and wave conditions, and the clearest detail you remember. Separate the description from the species name. “One small cetacean, curved fin, possible pale rear edge, head hidden” is specific enough for someone to compare with their own observation. Include the minimum count you saw together if several animals were around. Repeated surfacings can be useful for estimating the direction of travel. They don’t establish how many individuals were present by themselves.
A photo or video can make the head, fin and side easier to inspect later. Retain the full frame as well as a crop, and look at the frames before and after the clearest one to see whether light or foam changed the marking. If the image shows a fin cut off by a wave, leave the details you can’t see unresolved. A guide may also be able to compare the view with the other animals observed during the trip. There’s value in a careful description even if the species remains open.
Sometimes the best place to see the next surfacing is near the edge of the area you’re already watching. Use a stationary landmark on shore or a fixed point in your field of view to orient yourself. If the back appeared twice on a line, scan ahead a little and keep the water around that line in view. A dolphin or porpoise can turn underwater. Trying to follow a disappearing fin with a tightly zoomed camera can cost you the wider picture. From a vessel, follow the crew’s instructions and let the skipper manage wildlife encounters. Fisheries and Oceans Canada maintains current marine mammal viewing requirements. DFO marine mammal viewing guidance
Use an illustration at the same angle
Field illustrations often show a full side view so that differences between species are easy to compare. When you consult the DFO poster after your sighting, look at the part of the illustration that corresponds to what you actually saw. If you saw only the head and the water hid everything else, the flank pattern in the picture can help you prepare for a future sighting. It contributes little to the first identification. Note which features agree, which seem different and which you had no chance to observe. A useful comparison may give you two species to consider.
Practise from a boat or from shore
Eagle Eye Adventures’ guide to marine life around Campbell River introduces other species you might see alongside dolphins or porpoises. The Campbell River marine wildlife safari gives you time on the water with a guide who can explain which feature they used if a group comes into view. On your own, a shore viewpoint with a clear view of the water also gives you a chance to compare fins, surface movements and changes in light as the current moves past. Whichever setting you choose, the animals determine what you get to see. You can improve your description of even a single short surfacing by starting with the shape and then looking for a second feature that supports it.
