A humpback whale’s pectoral flippers can reach about one-third of its body length. These long surfaces help control the whale’s position as it turns, pitches or rolls through the water. Their rounded leading-edge bumps, called tubercles, affect how fluid moves around the flipper. Researchers have also documented a small number of humpbacks in Alaska using their flippers to help herd prey. The flippers’ length, shape and position on the whale make them useful in several different movements. NOAA Fisheries humpback whale profile Fish and Battle, humpback flipper anatomy study Kosma and colleagues, study of pectoral herding
When a humpback near Campbell River rolls and a long fin comes into view, you’re seeing a part of its body normally hidden below the surface. Look where the flipper joins the body and which way its edges face. The same flipper can appear long and flat from one angle and little more than a narrow line from another. A short view at the surface can help you understand how much control the whale has over a surface that long. Watch whether the fin moves across the water or whether the body carries it through a turn.
Where the flippers sit and what they do
The pectoral flippers extend from either side of the body near the front. The tail flukes at the rear provide much of the forward thrust during swimming. The flippers interact with the water as the animal moves and can help control the direction and orientation of the body. A change in the position of one flipper can have a different effect from a change in both. The whale can alter how the surfaces meet the flow as it turns or rolls. Miklosovic and colleagues, humpback flipper model and function
Picture a whale travelling forward with its flippers close to the sides. If it extends them into the flow, a larger part of each surface can interact with the moving water. The direction of the resulting force depends on the position of the flipper and how the water meets it. A force on a long surface away from the body can have leverage to influence a roll. That helps explain why a fin may extend at a conspicuous angle when the whale changes position. The rest of the body, including the tail, still matters to the whole movement.
From the surface, a whale may rise in a turn and show one flipper while the other stays submerged. You can describe the visible fin’s position and how the body turned. You may have little evidence about how the whale held the flipper on the other side. Underwater or overhead views can reveal different parts of the same movement, and an instrument attached by a research team can give another way to record changes in body orientation.
Why the leading edge is bumpy
The leading edge is the edge that meets the flow first in a given orientation. On a humpback flipper, rounded tubercles give much of that edge a scalloped shape. Anatomical research has described their position along the flipper and the shape of the cross sections. A flipper is a three-dimensional surface with a thickness, curve and taper. The bumps form part of that surface and can change the way flow behaves near it.
A wind tunnel study tested idealised flipper models with and without bumps along the leading edge. The model with bumps maintained useful lift to a steeper angle before stall under the conditions tested. Stall is a substantial loss of lift that can occur as flow separates from a surface at a high angle. The experiment shows how bumps can affect the forces on a flipper-like shape. A living whale bends, turns and changes speed in water, so the test isolates one part of a much larger movement. Miklosovic and colleagues, wind tunnel tests of leading-edge tubercles
You can think of lift here as a force across the direction of flow. It need not point straight up. A flipper turned at an angle can generate a force that affects the whale’s rotation or changes its path. Holding the same flipper at a different angle changes how it interacts with the water. The model comparison gives a way to see what a change to the leading edge can do while keeping the other parts of the experiment similar.
What the flippers contribute during a turn
A humpback can approach prey, roll to the side and bring its mouth through a patch of water in a short sequence. A long flipper can contribute control as the animal changes orientation. A person watching from a boat might see a pale fin rise just before the whale’s flank appears. Below the surface, the other flipper and tail can contribute to the turn at the same time. Understanding the movement takes a view of the body as well as the part that breaks the surface.
Turning also depends on speed and timing. A moving animal encounters a different flow from one resting near the surface. As the whale slows or accelerates, the forces from its flippers can change. If you compare two videos, look at the position of the whale before the turn and where it is headed afterwards. A brief frame showing a fully extended flipper can identify the body part. A sequence can show how that position fits the change in direction.
During some turns the side of the whale faces upward, which may make a long flipper much easier to see. The surface view gives you the body orientation as well as the fin’s outline. That can help distinguish a flipper being carried through the turn from one repeatedly raised and brought against the water. Both actions use the same anatomy, with different movements visible over time. NOAA Hawaiian Islands Humpback Whale National Marine Sanctuary behaviour guide
How some whales use their flippers around prey
In Southeast Alaska, researchers used aerial video to document humpbacks manoeuvring their pectoral flippers during feeding. They described a tactic called pectoral herding, in which whales used movements of the flippers around prey. The flippers could form a moving barrier as the whale approached a group of fish. This adds a role for the flipper during some feeding events alongside its contribution to movement. The study documents particular whales and feeding situations. A whale that raises a fin near the surface could be doing several other things.
The overhead view was useful because the researchers could see how the flipper moved in relation to prey and the whale’s mouth. A side view from a boat can hide much of that sequence. A white shape might appear near a patch of fish and then disappear behind the whale’s body. If the position of the prey is hidden, the visible flipper alone offers limited evidence of herding. The movement becomes easier to interpret when you can see which way the fin sweeps, where the fish are and when the mouth opens.
Think about the difference between controlling a turn and interacting with a school. In the first, the flipper changes the whale’s orientation or path. In the second, it also changes the space around the prey. Both can happen during one feeding sequence. The researchers named the tactic because they saw enough of the whale and prey together to describe a pattern. That is more information than an observer usually gets from a single splash.
How a model and a whale video answer different questions
A model lets researchers change one part of a flipper and see how the force changes in a controlled flow. The experiment can compare two shapes at a series of angles. This makes it possible to test the effect of the bumps while holding much of the rest of the shape constant. The tests cannot reproduce every position of a living humpback’s two flippers, tail and body at once. A result for a model at one angle applies to the conditions measured. Researchers can then ask how those conditions compare with the way a whale uses the surface.
A video of a whale can reveal how the animal extends a flipper during a real turn or near a group of prey. It can show the timing of the movement and how the fin’s position changes with the body. The forces acting on the flipper generally require another kind of measurement. If a whale rolls just as it extends the visible fin, the two events belong in the same sequence. The video alone may offer little evidence about how much the fin, the tail or existing momentum contributed to the turn.
Those views fit together when you describe a particular encounter. The anatomy tells you why there is a large, shaped surface available to interact with the flow. The model shows what some of those features can do under defined conditions. A sequence shows how the whale placed its fin during a movement. Start with the position you could see and then compare it with the evidence from the other methods. That is a more precise account than attributing every turn to the flipper’s bumpy edge.
Recognise the fin from the surface
Start by finding where the visible shape joins the whale. A pectoral flipper is long and relatively narrow. It comes from the side of the body. The flukes at the tail have two lobes separated by a central notch. The dorsal fin is smaller and sits on the back. If a long fin rises during a roll, the profile and the point where it joins the body can identify it even if you cannot see the bumps along the edge.
Colour can help in a good view. Humpback flippers can show dark and white areas, and the visible pattern changes when the animal turns. Bright water behind the fin can make it look entirely dark. White foam can cover part of the outline. Look for a feature that stays with the fin as it moves. A shape visible for several frames tells you more than a single flash. Eagle Eye Adventures’ guide to marine wildlife around Campbell River gives a broader comparison with other animals you may encounter in the same area.
If you’re on a boat, watch from the place the crew directs. A flipper can appear once and then be hidden for the rest of the encounter. Use a wide view so you can follow the animal’s movement rather than focusing only on the water where the fin appeared. Follow current Fisheries and Oceans Canada viewing guidance and leave vessel handling to the crew. From a public shore viewpoint, you can use binoculars when the water and distance permit. DFO marine mammal viewing guidance
Why are the flippers long as well as bumpy?
Length gives a humpback a large surface extending well out from its body, where forces can help it change orientation. The rounded bumps can affect flow over that surface. The position and movement of the flipper then determine how those features contribute to a particular turn, roll or feeding action. If you see one extended above the water, follow what the body does before and after. That gives you a direct observation of when the whale used it, and the anatomy and experiments explain how such a large surface can influence the movement. Miklosovic and colleagues, flipper flow tests
